In Wet Pipe Sprinkler Systems are installed more often than all other sorts of fire sprinkler systems. These systems are the most reliable because they are simple, with the only operating components being the sprinkler systems and (commonly, but not always) the automatic alarm check valve. This automatic water supply provides water under pressure to the system piping. In Dry Pipe, Systems are the 2nd most common sprinkler system type. In this, the dry pipe systems are installed in spaces in which the ambient temperature may be cold enough to freeze the water in a wet pipe system, rendering the system inoperable.
In Alpha Fire & Security Systems How Water Spray As Well As Water Mist Systems Are Used?
These water spray systems are operationally similar to a deluge system, but the piping as well as discharge nozzle spray patterns are designed to secure an uniquely configured hazard, usually being three-dimensional components or equipment. The water spray system is the most vital technique utilized in the Alpha Fire & Security Systems. In that, the nozzles utilized may not be listed fire sprinklers, and also are usually chosen for a specific spray pattern to conform to the three-dimensional nature of the hazard.
In that, the water mist systems are used for special applications in which it is chosen that producing a heat absorbent vapor is the primary purpose. Only this kind of system is commonly used where water damage may be a concern, or where water supplies are limited. This droplet size can be controlled by the adjusting discharge pressure via a nozzle of a fixed orifice size. By creating a mist, an equal volume of water will create a larger total surface area exposed to the fire. In this, the larger total surface area better facilitates the transfer of heat, hence allowing more water droplets to turn to steam more quickly.
Purpose Of A Sprinkler System And Its Design:
The Sprinkler systems are intended to either control the fire or to suppress the fire. Just how it regulates the Sprinkler system with the help of Alpha Fire & Security Systems? However, the control mode sprinklers are intended to control the heat release rate of the fire to prevent building structure collapse as well as pre-wet the surrounding combustibles to avoid fire spread. In case, the fire is not extinguished till the burning combustibles are exhausted or manual extinguishment is effected by firemens. These suppression mode sprinklers are intended to cause a serious sudden reduction of the heat release rate of the fire, followed quickly by complete extinguishment, prior to manual intervention.
